Why does a fully automatic mechanical watch stop?

Fully automatic mechanical watch, relying on the movement of the arm to cause the automatic gyro surface to generate energy, supporting the daily operation of the fully automatic mechanical watch.
Do. Wearing it for more than 8 hours a day can ensure the daily operation of the automatic watch, but it is not absolute. When the power of the automatic mechanical watch is insufficient, the watch can be wound to supplement the power of the mechanical watch to support daily operations.

Should an automatic mechanical watch be wound?

The automatic mechanical watch is based on the manual mechanical watch with an automatic rotor and an automatic wheel. Before the sale, the automatic watch was in a stopped state. When you get the intuitive look for the first time, you must wind it thoroughly to ensure the work of the watch on the day. Just wear enough every day.
Time, the automatic rotor will continuously replenish energy to the mainspring so that the watch can work usually. Minimize manual toggling of the mainspring, which will drive the automatic wheel to rotate together, resulting in wear and tear of mechanical parts and unnecessary maintenance costs.

It is marked waterproof. Why does water vapor still enter?

Does a waterproof watch have to be protected from water? Of course not.

A waterproof watch does not mean that it will not enter water vapor.

When wearing a watch to take a bath, the waterproof rubber ring used for waterproofing in the watch will accelerate aging due to the erosion of chemicals such as detergents, making the waterproof effect invalid.
During the rainy season, the humidity in the air is relatively high, and the temperature difference changes significantly, which can easily cause moisture to enter the watch. The same is true for saunas, air-conditioning rooms, and heating rooms.
The watch’s rubber ring gradually ages with time, and the waterproof performance also gradually decreases. The decline in waterproof performance can easily lead to water vapor intrusion. To avoid rusting of parts in the watch movement and battery loss, it is recommended that you maintain it regularly. I love the watch and check the watch parts.\

Is the watch with the cover open still waterproof?

The watch is waterproof, mainly depending on the waterproof rubber ring inside the watch to form a seal and waterproof. But if you often remove the back cover of the watch, it will affect the watch’s water resistance to a certain extent. According to personal experience, it is recommended that the wearer check the waterproof performance of the watch once every 1 to 2 years in case the waterproof apron of the watch is found to be aging and delays the repair of the eye. It is tested in a professional repair center, and the original waterproof apron is replaced, which is more reassuring to use…

Shopping Cart